Foma D704i, Manual

Page: 463 / 498

10
2 Enter any connection name
z
Click
接続
先
(APN)
設定 (Set dialup connection
(APN))
･
The following one-byte characters cannot be
entered for
接続名
:
￥ / : ＊ ? ! <> ｜
･
For Caller ID Notification setup explanations,
follow the instructions given by your provider.
■ Advanced setting (TCP/IP setting):
Click 詳細情報の設定 (Set detail info) to
display the
IP
アドレス (IP address) and ネー
ムサーバー (Name server) setting screens.
･
When dialup information such as address is
required, register it based on the information
assigned by the provider, etc.
3 Set the dialup connection (APN)
By default, “mopera.ne.jp” is registered in cid1,
and “mopera.net” in cid3. Register a dialup
connection (APN) for cid 2 or 4 to 10.
a
Click
追加
(Add)
The
接続先
(APN)
の追加
(Add dialup
connection (APN)) screen appears.
b
Set a dialup connection (APN) of your
provider, etc., which supports the FOMA
packet communication and the connection
procedure
z
Click
OK
The display returns to the
接続先
(APN)
設定
screen.
･
Only one-byte alphanumeric characters,
hyphens ( - ) and periods ( . ) can be entered
for
接続先
(APN)
.
･
This terminal supports only PPP connection,
so select
PPP
接続
(PPP connection) for
接続
方式
(Connection procedure). For the
compatible connection procedure, inquire
your provider.
4 Click
OK
The display returns to the screen in Step 2. Dialup
connection (APN) and the connection procedure set
in Step 3 appear in
接続先
(APN)
の選択
(Select
dialup connection (APN)).
5 Check the dialup connection (APN) of 接続
先
(APN)
の選択 and click 次へ
6
Enter the user name in
ユーザ
ID
and the
password in
パスワード z
Click
次へ
･
Enter the user ID and password assigned by
the provider, etc. correctly. Be careful about the
upper/lower case of each character.
･
If you select
すべてのユーザー
for
使用可能
ユーザーの選択
, all users that are allowed to
logon to Windows can access the connection.
▼
Next
▲
D704i_E_Manual.fm 10 ページ ２００７年７月１２日 木曜日 午後１２時２７分