Foma D704i, Manual

Page: 40 / 498

38 Before Using the Handset
*2 Estimated operation time of the FOMA terminal when it is closed and able to receive signals normally. The
call time and standby time may be reduced to about half, depending on the amount of charge in the battery,
the function settings, the ambient temperature and signal conditions (radio waves do not or hardly reach).
Using i-mode communication reduces the call (communication) time and standby time. Even if you do not
make a call or use i-mode, the call (communication) time and standby time will be reduced by composing
i-mode Mail or by starting downloaded i-
α
ppli or the i-
α
ppli standby display.
*3 Average operation time of the FOMA terminal when it is standing still, closed and able to receive signals normally.
*4 Average operation time of the FOMA terminal that is standing still, moving and outside the service area when it
is closed and able to receive signals normally.
*5 Estimated viewing time on the FOMA terminal with a stereo earphone connected to it.
■ Precautions
Alternatively, if you use data communication, Multiaccess, Still/Movie Camera or FM Radio, play video/
i-motion or music or watch 1Seg, the call (communication) time and standby time will be reduced.
How to charge
Use the FOMA AC Adapter 01/02 (optional) and Desktop Holder D14 (optional) to charge the battery. You can
also charge using only the AC adapter.
･
The battery pack can only be charged when it is attached to the FOMA terminal.
･
For details, refer to the manuals for the AC adapter and the Desktop Holder.
･
When inserting the FOMA terminal into the Desktop Holder, be careful not to put a strap in the holder.
･
When the FOMA terminal is not inserted firmly or it leans, the battery is not charged normally. Insert
the FOMA terminal until it clicks.
･
Insert the FOMA terminal into the Desktop Holder in the direction as shown in the above figure. If you
insert in a wrong direction, the battery cannot be charged.
･
When you push the projection of the Desktop Holder, the charging terminals protrude. Do not push the
projection unless you charge the FOMA terminal. Do not touch the charging terminals with your hands,
fingers or some other part of the body when the Desktop Holder is connected to a wall outlet.
a
Insert the power plug of the AC
adapter into a 100 V AC outlet.
b
Insert the AC adapter connector in the
Desktop Holder until it clicks.
c
Along with the Desktop Holder, insert
the FOMA terminal at the angle as
shown in the figure in the direction of
the arrow.
d
Check that charging starts.
Check that the Enter key lights in red.
When charging is completed, remove the
FOMA terminal from the Desktop Holder by
tilting it to the front while holding the
Desktop Holder by hand.
Charging the battery with the AC adapter alone
Open the cap on the FOMA terminal’s external connection
terminal, and insert the AC adapter connector in until it clicks.
●
When charging is completed, remove the AC adapter connector
from the FOMA terminal while pressing the release buttons on
both sides of the connector, and close the terminal cap.
●
You can charge the battery with the FOMA terminal either
closed or open.
Enter key
Desktop Holder
Power plug
AC
adapter
100 V AC
outlet
Connector
( up)
Release button
Connector
( up)