Foma D704i, Manual

Page: 64 / 498

62 Voice/Videophone Calls
Adjusting the volume of ring alert while receiving a call
Ring Alert Volume
･
The volume can be adjusted in 7 levels, from
silent
to level 1 to level 6 (the volume of Movie ringtone can
also be adjusted in 7 levels).
･
The ring volume changed while receiving a call is reset to the original volume when a call is ended.
1
%
while receiving a call
z O
to adjust the volume
The volume is set automatically by pressing
o
or waiting for a while after you stop key operations.
･
To turn up the volume:
u
or
r
･
To turn down the volume:
d
or
l
INFORMATION
●
To stop the ring alert and vibrator:
C
while receiving a call
●
While receiving a call, the ring volume cannot be set to
STEPTONE
(the volume changes in the order of
silent
→ level 1
→
...
→
level 6 about every 3 seconds).
●
For adjusting the ring alert volume in standby and for sound settings affected by Ring Alert Volume
☛
P102
Setting the priority screen for incoming calls during a call or packet communication
Priority Comm Mode
Set the priority of the screen to be displayed when you receive a packet communication through a
connected PC during a voice call or you receive a voice call during i-mode.
･
When there is incoming an i-mode mail or Message R/F during a voice call, the voice call talking screen
appears by priority regardless of this setting.
･
The screen switching caused by this function does not interrupt the call or packet communication.
1
m8461 z 1
-
3
No Set Up
： Displays the screen for the latest incoming call or communication without setting the priority.
Voice call
：
Displays the voice call talking screen by priority.
Packet
：
Displays the packet communication screen during a voice call, and the i-mode communication
screen during i-mode.
･
Press
b
to display the
Switch Task
menu then answer an incoming call.
Putting incoming calls on hold when you cannot answer right away
Response and Hold
･
Callers are charged for the time spent on hold.
1
f
while receiving a call
Default Level 4
Default No Set Up
Incoming voice
call on hold
Incoming videophone
call on hold
The incoming call is put on hold (Response and
Hold). The other party hears the response hold
guidance.
For videophone calls, the response hold image
appears on your and the other party’s terminals.
･
If
f
is pressed or the other party hangs up
during Response and Hold, the call is
disconnected.