1
Data communication
The data communication modes available from the
FOMA terminal and hints on use are explained here.
・
The FOMA terminal does not support fax
communication or the Remote Wakeup.
・
Data communication can be executed by
connecting the FOMA terminal to DoCoMo’s PDA,
“musea”, “sigmarion
Ⅱ
” or “sigmarion
Ⅲ
”. To use
“musea” or “sigmarion
Ⅱ
”, update is required. For
details on update, etc., visit the DoCoMo website.
・
This FOMA terminal does not support IP connection.
Supported data communication via the FOMA
terminal
FOMA terminal supports 3 communication modes:
packet communication, 64K data communication and
data transfer.
These communications become available by
installing the related software onto a PC from the
attached CD-ROM, connecting the FOMA terminal to
the PC and making required settings.
■
Packet communication
Packet communication charges are based on the
amount of data sent and received, which make it
suitable for high-speed exchange of relatively
small amounts of data such as sending and
receiving mail. No communication charges are
required when no data are exchanged even if you
are connected to the network. Therefore, sending/
receiving data as needed while remaining
connected to the network is possible.
High-speed packet communication provides a
maximum reception speed of 384 kbps and a
maximum transmission speed of 64 kbps by using
access points that support packet communication
on FOMA, such as DoCoMo’s “mopera U/mopera”
Internet connection service. These are offered by
the best-effort connection which allows
transmission speed to vary with the environment
and the rate of congestion.
Note that communications of large-size data such
as for viewing and downloading websites
containing images will require high charges.
■
64K data communication
The 64K data communications allow data transfer/
reception at stable communication rate of 64
kbps. Communication charges are based on the
duration of the connection to the network
regardless of the volume of data, which make it
suitable for sending and receiving relatively large
amounts of data as in downloading multi-media
contents. You need to use access points that
support FOMA 64K data communication such as
DoCoMo’s “mopera U/mopera” Internet
connection service or ISDN synchronized 64K
access points.
Note that communicating for long time will require
high charges.
■
Data transfer
It is the mode of non-charged communication in
which various data including the phonebook,
mails and bookmarks are transferred/exchanged.
・
Data can be transferred to another FOMA
terminal, mobile phone or PC via the infrared
communication as well.
Before usage
Operating environment
For data communication, the operating environment
of PC is as follows:
*1 USB port (conform to USB specification 1.1/2.0) is
required.
*2 The operation from OS upgrading is not covered by the
warranty.
INFORMATION
●
Note that utilization may not be possible in certain
operating environments. Furthermore, operation will
not be guaranteed in an environment other than that
described above or by upgrading the OS and
DoCoMo assumes no responsibility for operation
under such conditions.
Item
Requirements
PC*
1
PC/AT compatible computer
OS*
2
The Japanese version of
Windows 2000, Windows XP or
Windows Vista
Memory
requirements
Windows 2000: 64 MB or more
Windows XP: 128 MB or more
Windows Vista: 512 MB or more
Hard disk capacity
5 MB or more free disk space
When the warning screen appears
When the attached CD-ROM is inserted into the
PC, the following warning screen may appear.
This warning is displayed according to the security
setting of Microsoft Internet Explorer, but this will
not cause a problem.
Click
はい
(Yes).
Next
▲
D704i_E_Manual.fm 1 ページ 2007年7月12日 木曜日 午後12時27分
Summary of Contents for D704i
