Foma D704i, Manual

Page: 187 / 498

185 i-mode/i-motion/i-Channel
INFORMATION
●
Neither ring alert nor vibrator operates at the reception of
information. Likewise, the Enter key does not light or
flash.
●
If you cancel i-Channel or i-mode service subscription,
tickers are no longer displayed. Pressing
c
displays
the pre-subscription screen. Until the cancellation
procedure has finished, however, tickers may be
displayed on the screen and pressing
c
may display
the last received information in the channel list.
●
When
Show ticker
is set to
No
in i-Channel Ticker, no
tickers are displayed.
●
If you cannot receive information because the power of
the FOMA terminal is turned off or due to out-of-service
area or poor signal conditions, when receiving is
available, press
c
to receive information.
●
blinks during reception of information.
●
You can change the i-Channel host (although you usually
do not need to change it).
･
Operating procedure
☛
P175
Menu 271
Displaying i-Channel
Channel List
1
c
The channel list appears.
･
When video/i-motion, Chara-den or i- α ppli is
set as the standby display:
d71
･
i-Channel is not displayed even if
c
is
pressed.
2
Select a channel
Your terminal connects to the site and the detail
information appears.
･
Depending on the situation of use, information
may be received when displaying the channel
list.
INFORMATION
●
To refresh the channel list, press
m
in the channel list
and select
Retry
.
●
When you press
m
in the channel list and select
Sound
effect setting
, you can set whether to enable sound effects
for Flash movie. For setting, see “Setting image display
and sound effects”.
☛
P176
Menu 272 / Menu 8216
Changing i-Channel settings
i-Channel Ticker
You can set whether to run tickers of the received
i-Channel information on the standby display. You
can also set the ticker running speed.
･
When
Show ticker
is set to
Yes
, up to 10 tickers for
the newest information are shown on the standby
display each time the standby display appears
until the display items disappear. When
Show
ticker
is set to
No
, no tickers are displayed.
･
In the default state or in case the UIM is replaced
or the host address 2 is changed, if the i-Channel
information is automatically updated or if you
press
c
to display the channel list, the ticker
is displayed and you can set i-Channel Ticker.
1
d72 z
Set each item
2
p
･
When
Show ticker
is set to
Yes
, a confirmation
screen appears when video/i-motion, Chara-
den or i-
α
ppli is set as the standby display.
If you select
Yes
, the video/i-motion, Chara-den
or i- α ppli is released.
INFORMATION
●
In the following cases, i-Channel information cannot be
displayed in the ticker.
･
In All Lock
･
In PIM Lock
･
In Omakase Lock (Remote Lock)
･
In Public mode (Driving mode)
･
When the UIM not inserted
●
After replacing the UIM, i-Channel Ticker returns to its
default.
Default Show ticker: Yes Ticker speed: Normal
Show ticker
：
Select
Yes
or
No
.
Ticker speed
：
Select
Slow
,
Normal
or
Fast
.