Foma D704i, Manual

Page: 494 / 498

41
■ Communication protocol result code
■ Display example of result codes
When “ATX 0” is set
Regardless of the settings of the AT ￥ V command
(
☛
P38), only
CONNECT
is displayed upon
completion of connection.
When “ATX 1” is set
･
When “ATX1”, “AT
￥
V0” is set (default)
Upon completion of connection, the result code
is displayed in the following format: CONNECT
<speed between the FOMA terminal and PC>
Text display example:
ATD
＊
99
＊＊＊
3#
CONNECT 460800 (“1 21” in numeric
display)
･
When “ATX1”, “AT
￥
V1” is set*
1
Upon completion of connection, the code is
displayed in the following format:
CONNECT<speed between the FOMA terminal
and PC><communication protocol><the dialup
connection APN><upload top speed between
the FOMA terminal and the wireless base
station>/<download top speed between the
FOMA terminal and the wireless base station>*
2
*1 When “ATX1” and “AT ￥ V1” are set at the
same time, it is likely that dialup connection
will fail.
It is recommended that this function be
usually set to default, which is “ATX1” and
“AT ￥ V0”.
*2 When “AT ￥ V1” is set, <the dialup connection
APN> and after that are displayed only when
connected with packet communication.
No. Text display Meaning
1 PPPoverUD Connected via 64K data
communication
3 AV64K AV (videophone) connected via
[64K]
5 PACKET Connected with packet
communication
Text display example:
ATD
＊
99
＊＊＊
3#
CONNECT (“1” in numeric display)
Text display example:
ATD ＊ 99 ＊＊＊ 3#
CONNECT 460800 PACKET mopera.net/
64/384 (“1 21 5” in numeric display)
Indicates that speed between the FOMA
terminal and PC is 460,800 bps and the terminal
is connected to mopera.net providing a
maximum upload speed of 64 kbps and a
maximum download speed of 384 kbps.
D704i_E_Manual.fm 41 ページ ２００７年７月１２日 木曜日 午後１２時２７分