Foma D704i, Manual

Page: 425 / 498

423 Appendix/External Devices/Troubleshooting
Updating software
Software Update
This function checks connecting to the network for
the necessity for updating FOMA terminal software
and downloads part of the software as required
through packet communication*
1
to make updates of
the software.
When software update is required, the information
will be posted on the DoCoMo website or
お知らせ
(Notice) in iMenu.
*1 Packet communication for software update is free
of charge.
･
Software may be updated in the following two
methods:
INFORMATION
●
Never remove the battery pack while updating software.
Update fails.
●
Software update can be done while various data, such as
the phonebook entries registered in the FOMA Terminal,
camera images, downloaded data are retained; however,
note that data protection sometimes cannot be secured
depending on the conditions of your FOMA terminal
(such as malfunction, damage, or water leak). DoCoMo
recommends backing up necessary data. However, note
that some data such as downloaded data may not be
backed up.
･
Software cannot be updated in the following cases:
･
At the time of updating software, the unique
information of your mobile phone terminal (model
or serial number, etc.) will be automatically sent
to the server (the server for updating software
managed by DoCoMo). DoCoMo will not use the
sent information for any other purpose than
software update.
･
Software update (downloading or rewriting) may
take time.
･
If software update is executed when
ON
is set for
PIN1 Code On/Off, the PIN code entry screen will
be displayed at the time of automatic reload after
completion of software updating. You cannot
make/receive calls and operate communication
functions if the incorrect PIN1 code is entered.
･
While software is being updated, making/
receiving calls, various communication functions
or other functions are not available (Incoming
voice calls can be answered while downloading).
･
Any incoming videophone call cannot be answered
during download. Unanswered calls are recorded
as missed ones in the received call history.
･
Even if an alarm clock or any alarm is set while
software is being updated, the updating continues
without activating the alarm clock or the alarm.
･
For software update, SSL session is established
to the server (our site). Enable SSL certificate in
Manage Certificate. Configured as valid by
default.
☛
P179
･
Software update should be done with battery fully
charged and enough battery power ( ).
･
It is recommended that software update be
executed when good signal quality is obtained, 3
bars of the antenna icon ( ) are displayed and
the terminal is not being moved.
･
If radio wave signals become weaker during
software downloading or downloading has
stopped, retry software update in a place with
strong radio wave signals.
･
A displayed icon for the message stored at
i-mode Center disappears after software update.
If Receive Option Setting is set to
ON
and mail
arrives during software updating, the screen that
notifies an arrival of mail in the i-mode Center
may not appear after the software update being
completed.
･
When software update has failed, the message
Rewrite failed
appears and all the operations are
unavailable. In such a case, please bring the
FOMA terminal to a repair office designated by
DoCoMo.
･
Immediate Update
：
Update on the spot as desired.
･
Reserved Update ：
Reserve a day and time-slot for automatic
update of the software in the specified day
and time.
Usage precautions
･
During All Lock
･
While executing other functions
･
When the date and time are not set
･
When the UIM is not inserted
･
When the battery is not fully charged
･
When PIN1 code is being entered
･
When PIN1 code is locked
･
When
圏外
is indicated
･
During PIM Lock
･
The power is off
･
In Self Mode on
･
While talking
･
During Omakase Lock (Remote Lock)
･
During packet communication connecting with
a PC
･
During 64K data communication
Next
▲