Foma D704i, Manual

Page: 259 / 498

257 Watching TV
･
When you replace the UIM with another, a
confirmation screen appears asking whether to
initialize the broadcast storage area. Select
Yes
to
initialize the broadcast storage area. Selecting
No
disables the services that use the broadcast
storage area.
*1 ARIB: Association of Radio Industries and
Businesses
*2 Affiliates: The same affiliate channels such as Fuji
Television, Tokai Television and Kansai Television.
■ When the broadcast storage area becomes full
If a new TV station attempts to write in a station-
specific area when 8 station-specific areas are
already used in the broadcast storage area, a
confirmation screen appears asking whether to
overwrite saved items. When you select
Yes
, a
screen for selecting items to delete appears. Select
items and then select
Yes
to save new items.
■ Message shown on the screen when you read
information from the broadcast storage area
When you use the information from the broadcast
storage area while you are watching a TV
program, the message
Use saved information? It
may include information used by the same
broadcasting group
. may appear. If you select
Yes
,
this message does not appear again while you are
watching the same program. When you select
Yes
(Always)
, this message will not appear again even
if you change programs.
Before watching TV
When you view 1Seg TV, pull out the TV antenna
completely.
■ Pulling out the TV antenna
■ Changing the direction of the TV antenna
･
Be sure to pull out the antenna completely.
Otherwise, you cannot change its direction.
･
If you try to change the antenna direction
forcibly, it may cause deformation or damage.
■
Storing the TV antenna
･
If you try to pull down the antenna forcibly, it
may cause deformation or damage.
INFORMATION
●
When you have poor 1Seg reception, move your FOMA
terminal away from or close to your body or move to
another location for a better signal reception. Changing
the TV antenna direction may improve the signal
reception.
In the following cases, the image and sound are
interrupted. Upon completion of each action, the TV
screen returns.
･
When you make or receive a call
･
When a mail or Message R/F is received (in case
Display Priority is set to
Show message
)
･
When the preset date and time for an alarm clock
or schedule arrives
･
When an i-motion, melody or Chara-den file is
played or displayed* 1
･
When the program guide i-
α
ppli is activated or
i-
α
ppli is activated from data broadcast
･
When a 64K data communication call arrives
*1 A confirmation screen appears asking whether
to continue viewing.
TV antenna
b
a
a
Put your
finger under
the head of
the TV
antenna and
pull it out.
b
Pull out the TV
antenna until it
stops.
When an action occurs during 1Seg viewing
a
a
Pull out the
antenna to its
full length.
Hold the
lower part of
the antenna
and change
the direction.
a
b
a
Hold the
lower part of
the antenna
and pull it
straight
down.
b
Align the head
of the antenna
to the groove
and push it
down into the
body
completely.
Next
▲