Foma D704i, Manual

Page: 261 / 498

259 Watching TV
Setting the channel list to use
When multiple channel lists are registered, you can
change the channel list to use.
1
m95
･
To set channel lists during 1Seg viewing:
m1
on the vertical TV screen
2 Select a channel list
■ Checking the channels of the channel list:
Highlight a channel list
z p
The channels of the list are displayed.
Editing/deleting channel lists
1
m95 z
Highlight a channel list
2
Edit/delete the channel list
■ Changing the channel list name:
m1
z
Enter a channel list name (up to 20 one-
byte or 10 two-byte characters)
z p
■ Updating a channel list:
t
(
Area
) or
a
(
Auto set
)
z
Yes
･
The following procedures are the same as
for registering channel lists.
■ Deleting a channel list:
m2 z
Yes
･
The channel list being in use cannot be
deleted.
■ Initializing the channel lists (deleting all
channel lists):
m3 z
Enter the
terminal security code
z
Yes
■ Changing the remote control number:
a
p
The channels of the list are displayed.
b
Highlight a channel
z m1
c
Select a remote control number to
assign
z
Yes
･
If a channel is registered to the selected
remote control number, the remote
control numbers are exchanged.
■ Deleting a channel:
p z
Highlight a
channel
z m2 z
Yes
･
The channels of the channel list being in
use cannot be deleted.
･
If all the channels of a list are deleted, the
channel list itself is also deleted.
INFORMATION
● If you press
m1
on the vertical TV screen, a list of
channel lists appears to allow you to add or edit channel
lists. If you press
m2
, a list of channels is
displayed. You cannot delete a channel list or initialize all
channel lists.
●
When you move to a different location, available
broadcasting signals or stations may change due to
mountains or buildings in the area or any other reason. If
broadcasting signal conditions deteriorate after you
move, perform the automatic channel setting. You may
be able to receive different broadcasting signals or
stations. If you perform a channel search, you may be
able to view stations that you could not register with the
automatic channel setting.
☛
P260
Menu 91
Watching TV
Activate 1Seg
1
C
(for over a second)
A confirmation screen about the usage
conditions is displayed.
･
This screen appears only once. Next time you
press this key, 1Seg starts and receives a TV
program of the channel you watched before.
Go to Step 4.
2
Confirm the usage conditions
z o
A confirmation screen about the broadcast
storage area is displayed.
3
Check the content
z o
･
When no channel list is registered, a selection
screen for creating a channel list is displayed.
Go to Step 2 of “Registering the first channel
list”.
☛
P258
Upper: Remote control
No.
Lower: Dial key used for
channel selection
on the TV screen
Next
▲