Foma D704i, Manual

Page: 159 / 498

157 Camera
a
Images can be sent as an i-mode mail attachment.
In addition, these sizes are suitable for attaching to
Deco-mail.
b
Images can be sent as an i-mode mail attachment.
A confirmation screen appears asking whether to
convert to 240 x 320 or 320 x 240 (Standby) when
attaching files to mail.
c
Images can be sent as an i-mode mail attachment.
･
The maximum size of an image or video file that can
be sent to the i-mode terminal is up to 2 Mbytes.
･
Depending on the receiver’s model, the file may not
be received or displayed properly, or video may be
degraded or displayed as continuous images.
･
When a video file is sent to devices other than
below*
1
, use the video size of 176 x 144 (QCIF).
*1 903i series, 904i series, 703i series (except
P703i μ ) and 704i series (except P704i μ )
･
The setting for size restrictions may be changed
automatically depending on the setting for the
image size.
Flicker adjustment
If you set the flicker adjustment according to the
power supply frequency of the area of use when the
screen flickers under a fluorescent light etc., the
flicker may be able to be reduced.
Adjustment might fail to remove flickers if there is
strong light from fluorescent or other lamps.
1
m24
on the still image shooting
screen or the video recording screen
z
1
-
3
INFORMATION
●
If you use the shake reduction function with the flicker
adjustment being set to
Auto
, flickering may not be
adjusted sufficiently. It is recommended that you change
the flicker adjustment setting according to the local
power supply frequency.
● This setting is also reflected to the flicker adjustment
setting for the videophone and Bar Code Reader.
☛
P71,
P159
Changing the settings collectively
Adjust All
You can set the brightness, color density, white
balance and flicker adjustment at the same time.
･
When the scene mode/effect is set to
Whiten
or
Suntan
, Adjust All cannot be performed.
1
m25
on the still image shooting
screen or the video recording screen
■ Operating in the scene mode/effect setup
screen:
a
m1
on the still image shooting
screen or the video recording screen
b
Highlight the scene mode/effect
z m
2 Set each item
z p
･
The
Scene mode/effect
field displays the current
scene mode/effect (or the scene mode/effect
selected in the scene mode/effect setup screen
if you have operated in that setup screen). It
cannot be changed.
･
Some items cannot be selected depending on
the scene mode/effect.
･
If you have operated in the scene mode/effect
setup screen, pressing
p
sets the scene
mode/effect as well.
■ Resetting all items to the default settings
collectively:
t z
Yes
Restoring the default settings for shooting
Reset the settings for the scene mode/effect,
brightness, color density, white balance and flicker
adjustment to the default settings.
1
m26
on the still image shooting
screen or the video recording screen
z
Yes
Auto
：
Adjusts to reduce the flicker automatically.
50Hz (East-Japan)
：
Adjusts according to the power supply
frequency of Eastern Japan.
60Hz (West-Japan)
：
Adjusts according to the power supply
frequency of Western Japan.