48
Voice/Videophone Calls
Entering pause “P” or timed pause “T”
The pause and timed pause are available only for voice calls.
When you press
o
after the call is connected, the number after the pause (P) is sent.
■
Entering a timed pause “T”:
#
while entering the phone number (for over a second)
A timed pause (T) is used to dial an external number followed by an extension number. Enter a timed pause
(T) between the external and extension numbers. The extension number will be called a certain number of
seconds after the external number.
・
Timed pauses can be entered in succession.
・
Each timed pause is followed by a second interval.
・
You cannot make a call if a timed pause is entered at the beginning of the phone number.
INFORMATION
●
Tone signals (DTMF) may not be received depending on the receiving device.
●
You cannot make a call to another party by putting the current call on hold and entering a pause (P) or timed pause (T).
Switching between a voice call and videophone call
You can switch between a voice call and a videophone call by operating from the submenu during a call
when the other party’s terminal can also switch the call. Switching can be performed only from the
calling terminal.
・
This operation is available between the terminals that support switching between a voice call and
videophone call.
・
To switch the call, the other party needs to set
Indication ON
of Notify Switchable Mode in advance.
☛
P75
・
Because this FOMA terminal is not equipped with a camera on the front, you cannot send your image
through the camera while talking. By default, Chara-den is sent to the other party during a videophone call.
You can also send an image through the camera on the back or a substitute image set in advance.
1
m1
during a voice call
z
Yes
Example
Calling “03XXXXXXXXP12345” (P=Entered pause)
Example
Switching a voice call to a videophone call
■
Entering a pause “P”:
(
while entering the
phone number (for over a second)
A pause (P) is used for operating the answering
system at home, reserving tickets, etc. At the point the
pause (P) is entered, the dialed digits are separated
and tone signals (DTMF) are sent.
・
You cannot make a call if a pause is entered at the
beginning of the phone number.
©
Disney
Summary of Contents for D704i
