Foma D704i Manual Download Page 63

Page: 63 / 498

Voice/Videophone Calls

Setting to start talking by opening the FOMA terminal

Open Answer

･

This function is available for voice calls only (available even while Key Lock is on).

m8464

Setting to disconnect/continue/hold a call by closing the FOMA terminal

Close Setting

･

This function does not operate during 64K data communication or packet communication.

m8472

End the call

：

Ends the call.

Continue

：

Continues the call.

On hold

：

Puts the call on hold. The other party hears a guidance (on-hold tone).

INFORMATION

●

When you close the FOMA terminal during a call using the Flat-plug Earphone/Microphone with Switch (optional) or a

handsfree device (available in market), the call continues regardless of this setting if the settings are made to play

sounds from the connected device. Even if you remove the Flat-plug Earphone/Microphone with Switch (optional) or

handsfree device with the FOMA terminal closed, the call will continue.

●

When you close the FOMA terminal while recording a message, the recording continues regardless of this setting.

●

This setting applies when you close the FOMA terminal while recording a talking voice memo or video memo. When

hold

End the call

is set, the data recorded up to the point when the call is held or disconnected are saved.

Adjusting the volume of the other party’s voice during a call

Listen Volume

･

The volume of the other party’s voice can be adjusted from level 1 (lowest volume) to level 6 (highest

volume).

･

The volume changed while talking is retained even after the call is ended or the power is turned off.

during a call

to adjust the volume

The volume is set automatically by pressing

or waiting for a while after you stop key operations.

･

To turn up the volume:

･

To turn down the volume:

･

During a videophone call, press

to adjust the volume.

INFORMATION

●

For adjusting the earpiece volume in standby and for sound settings affected by Listen Volume

☛

P102

Default

OFF

Default

Continue

Default

Level 4

Summary of Contents for D704i



















































































































































































































































































































































































































































































































Search results

Summary of Contents for D704i

Reviews:

Related manuals for D704i

Brands by name

Popular brands

Foma D704i, Manual

Search results

Summary of Contents for D704i

Reviews:

Related manuals for D704i

Brands by name

Popular brands