Foma D704i, Manual

Page: 365 / 498

363 Character Entry
Setting input method
Input Method Setting
1
m8625 z
Set each item
z p
1
m
on the character entry screen
z
Set
input method
･
To switch between
Use Kana input
and
Use Slot
input
:
1
･
To switch between
Prediction ON
and
Prediction
OFF
:
2
･
To set the time period before the cursor
automatically moves:
3 z 1
-
4
Entering characters using 5-touch Input
Method
5-touch Input Method
Entering characters
Kana/Kanji Conversion
1
a2 z
Highlight
z o
The character entry screen appears.
･
In English display, the alphabet mode is
displayed first. Press
n
repeatedly to
change to the hiragana/kanji mode.
2
Enter “ きぎょう ”
･
To delete characters:
c
･
To switch upper/lower case:
t
･
To enter “
゛
” and “
゜
”: Enter the character
z
(
For example, after entering “
ほ
”, each pressing
of
(
changes the character to:
ぼ→ぽ→ほ
.
For characters that do not accept “
゛
” or “
゜
”,
they are entered as two-byte characters.
■
Returning to the previous character:
Pressing
a
immediately after entering a
character brings back to the previous
character. The character appears in the
reverse order of character switching every
time
a
is pressed (e.g.
… → 1 →お→え→
う→い→あ→ 1 →…
). However, when voiced
or semi-voiced sounds are entered or upper
and lower cases are switched, you cannot
switch characters.
■
Fixing hiragana without conversion:
Go to Step 4 after entering the hiragana.
■
Converting to katakana or alphanumeric:
Pressing
m
displays the list of conversion
options in katakana (one-byte/two-byte),
alphabets or numeric characters (one-byte/two-
byte). Highlight a conversion option and go to
Step 4.
3
p
･
%
also converts text to kana/kanji when
predictive conversion options are not
displayed. Predictive conversion
☛
P364
･
Press
c
to restore the entry before
conversion.
Default Input method: 5-touch Input prediction: ON
Auto cursor: Normal
Input method
：
Specifies
5-touch
or
Slot
. When
Slot
is set,
items below are disabled.
Input prediction
：
Specifies whether to display predictive
conversion options.
Auto cursor
：
Sets the time period before the cursor
automatically moves to the right.
･
Setting
Slow
moves the cursor in about 1.5
seconds.
･
Setting
Normal
moves the cursor in about
1 second.
･
Setting
Fast
moves the cursor in about 0.5
seconds.
Changing the setting during character entry
Example Entering “ 企業 ” in the message text
“ き ” →
2
twice
z r
(It is not necessary
when the cursor was moved by automatic
cursor function.)
“ ぎ ” →
2
twice
z (
“ ょ ” →
8
3 times
z t
“ う ” →
1
3 times
漢字
is indicated
Next
▲