Foma D704i, Manual

Page: 308 / 498

306 Data Display/Edit/Management
･
MTP mode
This mode enables you to connect the FOMA
terminal to a PC containing an operating system
that supports MTP (Media Transfer Protocol).
Use this mode to transfer music files from your
PC to the microSD memory card of your FOMA
terminal. If the operating system of your PC does
not support MTP, available operations are the
same as with the communication mode.
For transferring music files
☛
P327
･
Communication mode
This mode enables you to connect the FOMA
terminal to the PC for data communication. See
“Manual for Data Communication” in the supplied
CD-ROM for details.
1
m636 z 1
-
3 z
Yes
･
If you set the microSD mode, (dark blue)
appears on the standby display. In the MTP
mode, (dark blue) appears on the standby
display. If no microSD memory card has been
inserted, (gray) or (gray) is displayed.
･
In the communication mode, appears
when the microSD memory card is inserted.
･
No confirmation screen appears if the selected
mode is already set.
INFORMATION
●
The microSD mode supports the Windows 2000,
Windows XP and Windows Vista operating systems; the
MTP mode supports the Windows XP Service Pack 2.
●
You can change the USB mode setting even while the
FOMA terminal is connected with the PC. Note, however,
that the microSD mode or MTP mode may not be set if
the PC is set to start data communication automatically
when the FOMA terminal is connected. The mode cannot
be switched while the PC is accessing the microSD
memory card.
Connecting the FOMA terminal to PC
･
Turn on the power of both the PC and the FOMA
terminal before connecting them.
a
Open the cap on the FOMA terminal’s external
connection terminal
b
Insert one end of the FOMA USB Cable into the
FOMA terminal’s external connection terminal
until it clicks
c
Insert the other end of the FOMA USB Cable into
the USB connector of PC
･
While the FOMA terminal is connected to the PC
in the microSD mode or MTP mode, the Enter key
flashes in blue.
■ Disconneting the FOMA terminal from PC
Press the release buttons of the connector for the
FOMA terminal and pull it straight out. Never pull it
out forcibly; it may cause a failure. Pull the
connector out of the PC.
INFORMATION
● Even if you connect your PC to the FOMA terminal in the
microSD mode or MTP mode, the PC may not recognize
the FOMA terminal in the following cases:
･
When
microSD
of
LifeKit
is activated.
･
While data is being copied or moved from the FOMA
terminal to the microSD memory card.
･
While still image shooting, video recording, Sound
Recorder or Chara-den is active.
･
While the downloaded PDF data or i-motion is being
saved directly to the microSD memory card.
･
While Music Player is active.
●
When you disconnect the FOMA USB Cable from the PC
and the FOMA terminal in the microSD mode, click
on the PC’s task tray and then click
USB
大容量記憶装置
デバイス−ドライブ
(E:)
*
1 を安全に取り外します
*
2
(Release safely the USB large memory device-Drive E:).
Check that
USB
大容量記憶装置デバイス は安全に取
り外すことができます。
(Now you can remove the USB
large memory device safely) appears.
*1 The character assigned to the drive varies by the
system of PC.
Default Communication mode
Connector for the
FOMA terminal
(label facing up)
Release
button
USB connector