Foma D704i Manual Download Page 37

Page: 37 / 498

Before Using the Handset

Functional differences between the UIM types

Note the following functional differences between the UIM (blue) and the UIM (green/white) when used in the

FOMA terminal:

Attaching/removing the battery pack

･

Turn the power off before attaching or removing the battery pack. Also, attach or remove it with the FOMA

terminal closed using both hands.

･

Be careful not to touch the camera lens.

･

Use the specified Battery Pack D07.

Item

UIM (blue)

UIM (green/white)

Page

Number of digits of a phone number that can be

registered in the UIM phonebook

Up to 20 digits

Up to 26 digits

P81

Certificate Download for using FirstPass

Unavailable

Available

P180

WORLD WING service

Unavailable

Available

P35

Service Dialing Number

Unavailable

Available

P376

WORLD WING

WORLD WING is the DoCoMo international roaming service for FOMA that allows you to make and receive

calls with the same mobile phone number overseas by inserting the UIM (green/white) in a FOMA terminal

compatible with WORLD WING or in a W-CDMA or GSM mobile phone for overseas use.

●

If you subscribed to the FOMA service on and after September 1, 2005, no subscription is required to use

WORLD WING. However, if you requested not to subscribe to it at the time of subscription to the FOMA

service or have canceled the subscription, a subscription is required.

●

If you subscribed to the FOMA service on and before August 31, 2005 but have not subscribed to WORLD

WING, a subscription is required.

●

This service cannot be used with some billing plans.

●

If you lose the UIM (green/white) or have it stolen overseas, contact DoCoMo immediately to have the card

suspended. For contact information, refer to “General Inquiries” on the back of this manual. Note that any

call or communication charges incurred after the UIM is stolen will be borne by the customer.

Attaching the battery pack

Remove the back cover.

While pressing the top of the back cover with your

thumb, slide it in the direction of the arrow until it is

removed.

With the surface with the DoCoMo logo and the

recycle mark facing up, insert the battery pack into

the FOMA terminal at the angle as shown in the

figure.

Do not force the battery pack into the FOMA terminal.

Doing so could damage the body connector or battery

pack terminals.

Push the battery pack in.

Press here.

Next

▲

Summary of Contents for D704i



















































































































































































































































































































































































































































































































Search results

Summary of Contents for D704i

Reviews:

Related manuals for D704i

Brands by name

Popular brands

Foma D704i, Manual

Search results

Summary of Contents for D704i

Reviews:

Related manuals for D704i

Brands by name

Popular brands