Foma D704i, Manual

Page: 116 / 498

114 Sound/Screen/Light Settings
Setting the light for the display and keys
Display Light Setting
Lighting makes the display brighter.
1
m8241 z 1
-
7
2
1
-
7
･
For setting items other than
Normal use
, press
1
or
2
. When
Terminal setting
is set, the lighting
time set for
Normal use
is used.
･
When
Always
or
Always on
is set, the display is always lighted with the brightness set in
Backlight settings
.
However, it is lighted by
High
when AC adapter is connected.
･
When
i-
α
ppli
is set to
Software
, the display is lighted in accordance with the i-
α
ppli software.
Set whether to light the keys.
･
The Easy Selector Plus does not light.
1
m8242 z 1
-
3
･
If
AUTO
is set, the keys light/light off according to ambient brightness when pressing the key.
･
If
ON
is set, the keys light/light off in conjunction with the display light.
Set the brightness for lighting the display.
1
m8243 z
Set each item
z p
INFORMATION
●
When
Normal use
of
Display light time
is set to other than
Always
, if you do not press any keys for about 90 seconds, the
display disappears and the FOMA terminal goes into a power saving mode. If there is any key operation* 1 or an
incoming call, the display reappears. However, the FOMA terminal does not go into a power saving mode in the
following cases:
･
During a videophone call
･
While displaying the shooting screen of the camera or while shooting
･
While viewing 1Seg
･
While charging with
AC adapter connected
of
Display light time
set to
Always on
･
While executing the function with
Display light time
set to
Always on
*1 Even if
k
is pressed, the display does not appear. In addition, except for during a call, a number, etc. is not
entered even when pressing keys.
Setting the lighting time
Default Normal use: 10 sec AC adapter connected, i-mode session: Terminal setting
Camera session, Movie camera session, i-motion: Always on
i-
α
ppli: Terminal setting
Setting lighting of the keys
Default AUTO
Setting the display light
Default AUTO(Normal)
AUTO Brightness
： Sets whether to adjust the brightness of the display automatically.
･
When
AUTO(Normal)
is set, the display light is adjusted automatically with the
brightness to
Low
or
Normal
according to ambient brightness.
･
When
AUTO(High)
is set, the display light is adjusted automatically with the brightness
to
Low, Normal
or
High
according to ambient brightness.
･
When
OFF
is set, set the brightness.
Brightness
：
Sets the brightness when not adjusting the brightness automatically.