AIRCRAFT
DA 42 NG Series
AMM
Ice Protection System
Doc # 7.02.15
Rev. 4
30-00-00
Page 215
15 Mar 2018
B. Install a Proportioning Unit to the Nacelle
Detail Steps/Work Items
Key Items/References
(1)
Move the proportioning unit in position in the
nacelle.
CAUTION:
YOU MUST CONNECT THE HOSES TO THE CORRECT PORTS. IF
YOU DO NOT CONNECT THE HOSES CORRECTLY, THE SYSTEM
WILL NOT WORK PROPERLY.
(2)
Connect all hose connections to the
proportioning unit.
Remove caps.
(3)
Secure all hose connections with wire lock.
(4)
Install the bolts and washers which hold the
proportioning unit.
(5)
Close the small inspection panels on the
outboard side of the engine nacelles.
(6)
Carry out operational test.
Refer to Paragraph 2.
11. Replace an Ice Protection Porous Panel
The porous panels for the ice protection system are bonded to the wing, vertical and horizontal
stabilizer leading edges. They cannot be removed without damage to the panels. Refer to the airplane
manufacturer when you must replace a porous panel.
Summary of Contents for DA 42 NG
