AIRCRAFT
DA 42 NG AMM
Landing Gear
Detail Steps/Work Items
Key Items/References
Doc # 7.02.15
Rev. 4
32-40-00
Page 205
15 Mar 2018
CAUTION:
MAKE SURE THAT THE AREA AROUND THE AIRPLANE IS CLEAR.
IF THE LANDING GEAR HITS AN OBJECT THE LANDING GEAR CAN
BE DAMAGED.
CAUTION:
MAKE SURE THAT THE LANDING GEAR IS LOCKED DOWN
BEFORE YOU LOWER THE AIRPLANE WITH THE JACKS.
(5)
Reset the GEAR circuit breaker and make sure
that the landing gear selector is set to DOWN.
(6)
If a tire/wheel change is performed check
minimum clearance between MLG tire and the
lower wing shell / wheel bay cut-out.
Refer to Section 32-10 - Adjustment of
the MLG wheel in retracted position.
(7)
Carry out a test of the correct operation of the
landing gear retraction and extension system.
Refer to Section 32-30.
(8)
Move the wing and fuselage trestles clear of the
airplane.
(9)
Lower the airplane with the jacks.
Make sure that the area around the
airplane is clear.
Summary of Contents for DA 42 NG
