AIRCRAFT
DA 42 NG Series
AMM
Ice Protection System
Doc # 7.02.15
Rev. 4
30-00-00
Page 223
15 Mar 2018
B. Install a Low Pressure Switch in the Horizontal Tail
Detail Steps/Work Items
Key Items/References
(1)
Connect the hose connection of the feeding
line (from the proportioning unit) to the low
pressure switch.
(2)
Secure the hose connection with locking wire.
(3)
Move the low pressure switch in position to
the low pressure switch bracket bonded to the
upper shell of the horizontal tail.
In flight direction.
(4)
Install bolts and washers which hold the low
pressure switch to the bracket.
(5)
Secure the bolts with locking wire.
(6)
Connect the hose connections of the feeding
line (to panel inlet) to the low pressure switch.
Max. length 200 mm.
(7)
Secure the hose connection with locking wire.
(8)
Connect the electrical connector from the low
pressure switch.
(9)
Carry out operational test.
(10)
Install maintenance cap.
Use sealant.
Summary of Contents for DA 42 NG
