AIRCRAFT
Navigation
DA 42 NG AMM
Page 202
15 Mar 2018
34-41-00
Doc # 7.02.15
Rev. 4
3. Remove/Install the Stormscope Antenna
A. Remove the Stormscope Antenna
Detail Steps/Work Items
Key Items/References
(1)
Remove the horizontal stabilizer fairing.
Refer to Section 55-10.
(2)
Open the WX-500 circuit breaker.
(3)
Remove the screws which attach the stormscope
antenna to the mounting bracket.
Hold the antenna!
(4)
Disconnect the connector of the stormscope
antenna.
(5)
Remove the stormscope antenna from the
horizontal stabilizer.
B. Install the Stormscope Antenna
Detail Steps/Work Items
Key Items/References
(1)
Put the stormscope antenna in position on the
horizontal stabilizer.
The arrow must point into flight
direction.
(2)
Connect the connector of the stormscope
antenna.
(3)
Install the screws which attach the stormscope
antenna to the mounting bracket.
(4)
Close the WX-500 circuit breaker.
(5)
Install the horizontal stabilizer fairing.
Refer to Section 55-10.
(6)
Do a test of the stormscope system.
Refer to Paragraph 4.
4. Test of the Stormscope System
Perform the installation checkout as outlined in Goodrich Stormscope WX-500 Installation Manual
P/N 009-11500-001 Chapter 3 'Installation Checkout'.
Summary of Contents for DA 42 NG
