AIRCRAFT
DA 42 NG AMM
Landing Gear
Detail Steps/Work Items
Key Items/References
Doc # 7.02.15
Rev. 4
32-20-00
Page 233
15 Mar 2018
(9)
Release the nose landing gear folding stay
tension:
S
Remove the nut and washer from the nose
landing gear leg which holds the folding
stay.
S
Carefully remove the bolt with spacer while
securing the folding stay firmly.
S
Release the nose landing gear folding stay
slowly until the spring tension is fully
released.
Refer to Figure 5.
Support the folding stay with your hands
and at the same time hold the nose
landing gear leg with your feet.
The nose landing gear leg falls
backwards, when the bolt is removed.
(10)
Disconnect the hydraulic lines from the actuator.
Use a suitable container to catch spilt
hydraulic fluid. Fit caps on all open
connections.
(11)
Disconnect the actuator from the nose landing
gear:
S
Remove the circlip which secures the ball
joint of the actuator.
S
Remove the pin with the second circlip.
S
Remove the bolt from the nose landing gear
brace assembly.
S
Move the actuator clear of the airplane.
(12)
Measure and record the distance from the
actuator safety lock washer to the center of the
ball joint.
Refer to Figure 8. Note the distance
marked ‘Y’.
Summary of Contents for DA 42 NG
