AIRCRAFT
DA 42 NG AMM
Indicating Systems
Doc # 7.02.15
Rev. 4
31-40-00
Page 217
15 Mar 2018
B. Install the GDC 7X Air Data Computer (ADC)
%
Detail Steps/Work Items
Key Items/References
(1)
Install the GDC 7X:
%
S
Move the GDC 7X assembly into position on
%
the mounting rack.
S
Install the adapter plate and tighten the
2 screws that attach the GDC 7X to the
%
mounting rack.
S
Install the Pitot/Static tubes to the unit.
S
Connect the electrical cables.
As noted in 6A.
At the in-line connector.
(2)
Install the instrument panel cover.
Refer to Section 25-10.
(3)
Connect the airplane main battery.
Refer to Section 24-31.
(4)
Do a test for the correct operation of the
integrated cockpit system (ICS):
S
Set the ELECT. MASTER switch to ON.
S
Set the ELECT. MASTER switch to OFF.
The ICS must power-up and
successfully complete its self-test
procedure.
(5)
Do a Pitot/static leak test.
Refer to Section 34-10.
Summary of Contents for DA 42 NG
