AIRCRAFT
Servicing - General
DA 42 NG AMM
Page 4
15 Mar 2018
12-30-00
Doc # 7.02.15
Rev. 4
C. Apply the Anti-Corrosion Coating
CAUTION:
YOU MUST USE THE APPROVED ANTI-CORROSION COATINGS IN
ORDER TO PREVENT DAMAGE TO OTHER PARTS OF THE
AIRPLANE.
Approved anti-corrosion coatings are:
)
Ardrox® AV 30 (color: red; recommended for not visible parts)
%
)
Socopac 65H (color: red; recommended for not visible parts)
%
)
Cor - Ban 35 (color: transparent; recommended for visible parts)
%
Apply the anti-corrosion coating:
)
Read the product datasheet carefully.
)
Cover the airplane parts and surfaces in your working area, which are not subject to the
anti-corrosion coating.
)
Apply the anti-corrosion agent to the parts. Make sure the surface is covered with a thin film
of the anti-corrosion coating.
)
The anti-corrosion coating needs 3 hours to dry.
)
Remove the covers from the airplane.
D. Anti-Corrosion Coating Checklist
Refer to the figure numbers in the following table to identify the parts, where anti-corrosion coatings
must be applied.
Summary of Contents for DA 42 NG
