AIRCRAFT
Starting
DA 42 NG AMM
Page 210
15 Mar 2018
80-00-00
Doc # 7.02.15
Rev. 4
5. Replace the Glow Fuse
Detail Steps/Work Items
Key Items/References
WARNING:
MAKE SURE THAT THE ENGINE IS SAFE BEFORE YOU DO ANY
WORK ON THE STARTER SYSTEM. IF THE ENGINE STARTS THE
PROPELLER CAN CAUSE INJURY OR DEATH.
(1)
Disconnect the airplane main battery.
Refer to Section 24-31.
(2)
Remove the relay panel access panel from the
related engine nacelle.
Refer to Section 52-40.
(3)
Remove the fuse:
S
Loosen the nut that attaches the electrical
cable and fuse to the fuse holder.
S
Loosen the nut that attaches the bus bar link
and fuse to the fuse holder.
S
Pull the fuse clear of the fuse holder.
Refer to Figure 4.
Top side. Do not remove the nut.
Bottom side. Do not remove the nut.
(4)
Install a new fuse:
S
Move the new fuse into position at the fuse
holder.
S
Tighten the 2 nuts.
(5)
Install the relay panel access panel onto the
related engine nacelle.
Refer to Section 52-40.
(6)
Connect the airplane main battery.
Refer to Section 24-31.
(7)
Do an engine ground run-up and make sure that
the glow plugs operate correctly.
Refer to Section 71-00.
Summary of Contents for DA 42 NG
