AIRCRAFT
DA 42 NG AMM
Propeller
Detail Steps/Work Items
Key Items/References
Doc # 7.02.15
Rev. 4
61-20-00
Page 209
15 Mar 2018
(11)
Make sure that the engine instruments read
correctly.
The RPM, LOAD and FUEL FLOW
indications must be zero (0). Dashes (-)
indicate a malfunction.
(12)
Turn the START key switch to the LH or RH
position as required.
Do not start the engine as long as the
white GLOW status light is illuminated.
(13)
When the selected engine starts:
S
Release the START key switch.
(14)
Leave the power lever at 0%.
Make sure that there are no warning
lights on.
(15)
Monitor the oil pressure.
The oil pressure must rise to 1 bar
minimum, within 3 seconds of starting
the engine. If it does not, then you must
shut-down the engine.
(16)
Let the engine idle at 900 RPM for 4 minutes.
Monitor the engine instruments for
unusual indications.
(17)
Set the power lever to give a speed frequency
of 1500 RPM.
(18)
Shut off the engine by setting the related
ENGINE MASTER switch to OFF.
The engine must stop. The propeller
must feather (
´
feathered position: 81°).
(19)
Reset the ENGINE MASTER switch to ON.
Do not start the engine.
Summary of Contents for DA 42 NG
