AIRCRAFT
Lights
DA 42 NG AMM
Page 202
15 Mar 2018
33-40-00
Doc # 7.02.15
Rev. 4
B. Install the Taxi Light
Detail Steps/Work Items
Key Items/References
(1)
Install the taxi light unit:
S
Move the light unit into position by the
housing.
S
Connect the electrical connections to the
light unit.
S
Move the light unit fully into position in the
housing.
S
Install the 2 bolts, washer and nuts that
attach the light unit to the structure.
Refer to Figure 3.
At the in-line connector.
(2)
Install the light cover:
S
Move the light cover into position below the
fuselage.
S
Install the 8 screws and washers that attach
the light cover to the light housing.
(3)
Reset the TAXI/MAP/ACL circuit breaker.
Instrument panel, right side.
(4)
Set the ELECT. MASTER switch to ON.
Instrument panel.
(5)
Do a test for the correct operation of the taxi
light:
S
Set the TAXI light switch to ON.
S
The taxi light must come on.
S
Set the TAXI light switch to OFF.
S
The taxi light must go off.
(6)
Set the ELECT. MASTER switch to OFF.
Instrument panel.
(7)
Install the pilot's seat.
Refer to Section 25-10.
Summary of Contents for DA 42 NG
