AIRCRAFT
Communications
DA 42 NG AMM
Page 202
15 Mar 2018
23-60-00
Doc # 7.02.15
Rev. 4
2. Replace a Static Discharge Wick
Use this procedure for all the static discharge wicks.
A. Replace a Static Discharge Wick
Detail Steps/Work Items
Key Items/References
(1)
Remove the 2 screws that attach the discharge
wick to the wick mounting.
Refer to Figure 2.
(2)
Make sure that the mounting is clean and
correctly bonded to the airplane structure.
(3)
Move the new static discharge wick into
position at the mounting.
(4)
Install the 2 screws that attach the wick to the
mounting.
(5)
Do a test for the correct bonding of the static
discharge wick to the airplane bonding system.
Refer to Section 51-80.
Summary of Contents for DA 42 NG
