AIRCRAFT
DA 42 NG AMM
Windows
Detail Steps/Work Items
Key Items/References
Doc # 7.02.15
Rev. 4
56-10-00
Page 203
15 Mar 2018
(18)
Apply masking tape on both sides of the joint.
Refer to Figure 3.
(19)
Use sealant to fill the joint and the pinholes and
smoothen the surface.
Use plastic spattle.
(20)
Spray the joint with a water/cleaning solvent
solution and smooth the surface by hand.
(21)
Remove all adhesive and masking tapes.
(22)
Allow the sealant to cure.
Minimum 24 hrs.
(23)
Install the canopy or door.
Only if you have replaced the canopy or
door window.
Refer to Section 52-10.
Summary of Contents for DA 42 NG
