Dell PowerVault 720N Command Reference Manual Download Page 72

Page: 72 / 606

2-14 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

+RZ7KHKRPH'LUHFWRU\,V8VHG

How the

/home

directory is used depends on the file-sharing protocol used by the cli-

ent. Table 2-8 describes how NFS and CIFS clients use the directory.

cifsconfig.txt

CIFS commands that the filer used for

configuration

The filer maintains this file automatically

whenever you enter a

cifs

command,

which can cause changes you make man-

ually to be lost.

To edit this file, terminate CIFS service by

using the

cifs terminate

command,

edit and save the file, then reboot the filer.

CIFS only

exports

NFS export points

NFS only

hosts

Known hosts and their IP addresses

All

hosts.equiv

Trusted hosts and users for

rsh

All

group

CIFS group names, GIDs (group identifica-

tion numbers), and members names

Not used if you use NIS to authenticate

groups.

CIFS only

netgroup

Network

groups

NFS

only

nsswitch.conf

The order in which the filer contacts name

services

All

passwd

Users names, UIDs (user identification

numbers), and primary GIDs

Not used if you use NIS to authenticate

users.

CIFS

Script of commands to be executed when

the filer is initializing

All

serialnum

Filer serial number and license codes.

All

shadow

Encrypted password strings and pass-

word aging information

Not used if you use NIS to authenticate

users

CIFS

7DEOH&RQWHQWVRIWKHHWF'LUHFWRU\

FRQWLQXHG

)LOHQDPH

&RQWHQWV

)LOHVKDULQJ

SURWRFRO

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 72 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: