manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 464 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 464

A-50 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

license - license Data ONTAP 5.3 services

SYNOPSIS

license

 [ 

service=code

 ] ...

DESCRIPTION

The 

license

 command enables you to enter license codes for specific Data 

ONTAP 5.3 services. The license codes are provided by Dell. With no arguments, 

the 

license

 command prints the current list of licensed services and their codes. 

It also shows the services that are not licensed for your filer.

The filer is shipped with license codes for all purchased services, so you need to 

enter the 

license

 command only after you purchase a new service or after you 

reinstall the file system.

To disable a license, enter the code 

DISABLE

.

All license codes are case-insensitive. Do not leave a space before or after the 

equal sign in the command.

The following list describes the services you can license:

Enter 

nfs

 to enable NFS.

Enter 

cifs

 to enable CIFS.

Enter 

http

 to enable HTTP.

Enter 

snapmirror

 to enable SnapMirror.

Enter 

snaprestore

 to enable SnapRestore.

EXAMPLES

The following example enables NFS:

filer> 

license

 

nfs=ABCDEFG

  nfs license enabled.

       nfs enabled.

The following example disables CIFS:

filer> 

license

 

cifs=DISABLE

  unlicense cifs.

       cifs will be disabled upon reboot.

license

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments