Dell PowerVault 720N Command Reference Manual Download Page 525

Page: 525 / 606

Command ReferenceA-111

vol

snapmirror

status

displays whether SnapMirror is enabled. If so, the command displays

whether the filer is copying data between the source volume and the mirror,

and the percentage of data that has been copied.

EXAMPLES

vol

create

vol1

-r

creates a volume named

vol1

with 20 disks. The RAID groups in this volume

can contain up to 10 disks, so this volume has two RAID groups. The filer

adds the current spare disks to the new volume, starting with the smallest

disk.

vol

create

vol1

20@9

creates a volume named

vol1

with 20 9-GB disks. Because no RAID group

size is specified, the default size (14 disks) is used. The newly created vol-

ume contains one RAID group with 14 disks and another group with six

disks.

vol

create

vol1

-d

8a.1

8a.2

8a.3

creates a volume named

vol1

with the specified disks.

vol

create

vol1

vol

options

vol1

raidsize

The first command creates a volume named

vol1

with 10 disks, which

belong to one RAID group. The second command specifies that if any disks

are subsequently added to this volume, they will not cause any current RAID

group to have more than five disks. Each existing RAID group will continue

to have 10 disks and no more disks will be added to that RAID group. When

new RAID groups are created, they will have a maximum size of five disks.

vol

options

vol1

root

The volume named

vol1

becomes the root volume after the next filer reboot.

vol

options

vol1

nosnapdir

In the volume named

vol1

, the snapshot directory is invisible at the client

mount point or at the root of a share. Also, for UNIX clients, the .snapshot

directories that are normally accessible in all the directories become

inaccessible.

vol

status

-r

vol1

displays the RAID information about the volume named

vol1

RAID group 0

RAID Disk HA.DISK_ID Used (MB/blks) Phys (MB/blks)

--------- -------- -------------- --------------

parity 0.3 4000/8192000 4095/8386728

data 0.2 4000/8192000 4095/8386728

vol

copy

start

-s

nightly.1

vol0

filer1:vol0

copies the nightly snapshot named

nightly.1 on the vol0 volume on the local filer to the vol0 volume on a remote

filer named filer1.

vol

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 525 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: