Dell PowerVault 720N, Command Reference Manual, Page: 108 / 606

3-12 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide
where
newvol
is the name for the new volume and
n
is the number of disks to use.
You must have at least
n
spare disks available.
$IWHU&UHDWLQJD1HZ9ROXPH
After you create a new volume on a CIFS filer, you must create shares that refer to the
new volume to enable clients to access it.
After you create a new volume on an NFS filer, you must
1. Update the system
/etc/exports
file.
2. Run
exportfs
.
3. Add the appropriate mount point information to the
/etc/fstab
or
/etc/vfstab
file
on clients that mount volumes from the filer.
$GGLQJ'LVNVWRD9ROXPH
To add more disks to an existing volume, enter
YRODGG YROQ
where
vol
is the name of the volume and
n
is the number of disks to be added.
0RQLWRULQJ9ROXPH6WDWXV
To determine volume status, such as size, options, disk assignments, and so on, enter
YROVWDWXV YROXPH
To view the RAID group and individual disk information for a particular volume, enter
YROVWDWXVU YROXPH
To view the RAID group and individual disk information for all volumes, enter
YROVWDWXVU
6HWWLQJ9ROXPH2SWLRQV
To set various volume options, enter
YRORSWLRQV YROXPHRSWLRQYDOXH
&RQYHUWLQJD0LUURU,QWRD5HJXODU9ROXPH
After you use the SnapMirror™ feature to mirror data to a mirror, you can convert the
mirror into a regular volume so that clients can write data to the volume. Enter the fol-
lowing command syntax to convert a mirror to a regular volume:
YRORSWLRQV YROXPH VQDSPLUURUHGRII