manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 171 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 171

File Sharing Between NFS and CIFS Users5-15

6WHS

To force all CIFS file names created by CIFS to be lowercase, enter the following 

command:

options cifs.save_case off

3UHVHUYLQJWKH&DVHRI&,)6)LOH1DPHV

'HVFULSWLRQ

This procedure enables you to return from forcing all file names to be stored in lower-

case to the default behavior of preserving the case of CIFS file names. You perform 

this procedure when you want to return to the default behavior.

&DXWLRQ

File names that were converted to lowercase are not changed.

6WHS

To return to preserving the case of CIFS file names, enter the following command:

options cifs.save_case on

'LUHFWRU\&RQYHUVLRQ7LPH

'LUHFWRU\&RQYHUVLRQ&DQ7DNHD&RQVLGHUDEOH$PRXQWRI

7LPH

Although the conversion process to Unicode directory format is automatic, the initial 

conversion of a directory can take a considerable amount time, especially if the direc-

tory contains a large number of files. 

It is important to take these conversion times into consideration when deciding when 

to convert the directories. While a directory is being converted, the filer might not be 

able to perform any other file system or network operations until the conversion is 

complete.

:KHQ7KHUH,VQR1HHGWR&RQYHUW

If there are portions of the directory tree that will never have CIFS access, there is no 

need to convert them. However, any future CIFS access to an unconverted directory 

immediately triggers its conversion. 

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments