manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 164 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 164

5-8

Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NOTE: If a filer is licensed for CIFS, you must set a language for every volume on the 

filer. 

:KDWD/DQJXDJH$SSOLHVWR

The filer uses a character set appropriate to a given language. The language you select 

determines which character set the filer uses for the following names:

‡

User names

‡

Share names

‡

System and domain names

NOTE: The following must be in ASCII:

‡

Qtree names

‡

Snapshot names

‡

Volume names

.LQGVRI&KDUDFWHU6HWV6XSSRUWHG

The filer supports the following types of character sets. Table 5-1 shows what proto-

cols and operating systems use a particular character set. You use this information to 

determine what directory format you use.

7DEOH&KDUDFWHU6HWV6XSSRUWHG

&KDUDFWHU

VHWW\SH

'HVFULSWLRQ

8VHGE\

ASCII

A 7-bit character set used by most 

computers. Does not allow letters 

with accents; that is, diacritics.

NFS, console and log 

files, qtree names, 

snapshot names, and 

volume names.

Unicode

A 16-bit character encoding sys-

tem. It includes all major languages.

WIN 32 applications 

and file names in the 

following systems:

‡

Windows NT

‡

Windows 9

x

UNIX

A variety of character sets used by 

UNIX. Can include single-byte and 

multibyte characters.

NFS, console, and log 

messages

UTF-8

An ASCII-compatible multibyte Uni-

code encoding.

Some Solaris clients

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments