Dell PowerVault 720N Command Reference Manual Download Page 228

Page: 228 / 606

7-28 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

81,;)LOH$FFHVV'HWDLO'LVSOD\V

UNIX file access detail displays show the same kind of information as the Windows

file access event detail screens, but instead of an object name, NFS access appears

because the file is being accessed through NFS. In addition, UNIX file access detail

displays show the following information about the file that you are monitoring:

The ID of the volume in which the file is located

The ID of the latest snapshot in which the file is located

The inode of the file

This information enables you to find the file using the

ls -i

command.

8QVXFFHVVIXO)LOH$FFHVV'HWDLO'LVSOD\

An unsuccessful file access detail display appears when a user could not access a file.

For example, an unsuccessful file access occurs when a user tries to access a file but

does not have permission to access it.

The display shows the ID of the user who tried to access the file and an indication

that the access attempt was unsuccessful.

/RVW5HFRUG(YHQW'HWDLO'LVSOD\

If the system could not create an audit record, the Lost record event detail display

gives a reason, such as the following reason:

,QWHUQDOUHVRXUFHVDOORFDWHGIRUWKHTXHXHLQJRIDXGLWPHVVDJHV

KDYHEHHQH[KDXVWHGOHDGLQJWRWKHORVVRIVRPHDXGLWV

1XPEHURIDXGLWUHFRUGVGLVFDUGHG

Object User Name

Your login.

Client Domain

The name of your computer or the domain contain-

ing the client users account.

Client Logon ID

A unique identifier assigned when the client user

logged on.

Accesses

The types of accesses to the object that were

attempted.

Privileges

Your privileges.

7DEOH:LQGRZV)LOH$FFHVV'HWDLO'LVSOD\V

FRQWLQXHG

)LHOG

'HVFULSWLRQ

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 228 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: