Dell PowerVault 720N Command Reference Manual Download Page 429

Page: 429 / 606

Command Reference A-15

filer>

cifs

news

Name Mount Point Description

---- ----------- -----------

NEWS /vol/vol0/news News

DOMAIN\Guests / No Access

everyone / Read

Creating

new

To create a new share, use the -

add

option:

cifs

add

sharename

path

[ -

comment

description

]

[ -

maxusers

userlimit

]

[ -

forcegroup

groupname

]

sharename

name of the new share; clients use this name to access the share.

path

full path name of the directory on the filer that corresponds to the

root of the new share.

comment

description

description of the new share. CIFS clients see this description when brows-

ing the filers shares. If the description includes spaces, it must be enclosed

in double quotation marks. If you do not specify a description, the descrip-

tion is blank.

maxusers

userlimit

maximum number of simultaneous connections to the new share.

userlimit

must be a positive integer. If you do not specify a number, the filer does not

impose a limit on the number of connections to the share.

forcegroup

groupname

name of the group to which files to be created in the share belong. The

groupname

is the name of a group in the UNIX group database.

Deleting

existing

To delete a share, use the -

delete

option:

cifs shares -delete

sharename

is the name of the share to be deleted. A share cannot be deleted if it

is in use.

cifs shares

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 429 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: