manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 559 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 559

Command ReferenceA-145

NAME

rc - system initialization command script

SYNOPSIS

/etc/rc

DESCRIPTION

The command script 

/etc/rc

 is invoked automatically during system initialization. 

Since the filer has no local editor, 

/etc/rc

 must be edited from an NFS client with 

root access to 

/etc

. Alternately, you can use the 

setup

 command to generate a 

new 

/etc/rc

 file without using NFS.

EXAMPLE

This is a sample 

/etc/rc

 file as generated by 

setup

:

  

#Auto-generated by setup Tue Jun 2 21:23:52 GMT 1994

  hostname filer.dell.com

  ifconfig e0 ’hostname’-0

  ifconfig e1a ’hostname’-1

  route add default MyRouterBox 1

  routed on

  timezone US/Central

  savecore

  exportfs -a

  nfs on

FILES

/etc/rc

SEE ALSO

exportfs, exports, hostname, hosts, ifconfig, nfs, route, routed, savecore, 

setup, timezone, autosupport

rc

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments