manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 479 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 479

Command Reference A-65

name 

/etc/http/man/

name

 can be accessed with the URL 

http://

filer

/na_admin/man/

name

.

httpd.log.max_file_size

Specifies the maximum size that the HTTP log file 

/etc/log/

httpd.log

 can grow to. The default is 2147483647, which is the larg-

est file size that many clients support.

httpd.rootdir

 

Specifies the complete pathname of the root directory that con-

tains files and subdirectories for HTTP access.

httpd.timeout

 

Specifies the minimum amount of time (in seconds) before an idle 

HTTP 15 connection will time out. The default is 900 seconds, 

which is fifteen minutes.

httpd.timewait.enable

When enabled, the filer will put HTTP connections that have been 

closed by the client into the TIME_WAIT state for one minute, 

which is twice the maximum segment lifetime (2*MSL). By default, 

TIME_WAIT state is bypassed for HTTP connections.

ip.match_any_ifaddr

If the option is on, the filer will accept any packet that is addressed 

to it even if that packet came in on the wrong interface. If you are 

concerned about security, you should turn this off.

nfs.mount_rootonly

When enabled, the mount server will deny the request if the client 

is not root user using privileged ports. By default, the feature is 

enabled for more secure access.

nfs.per_client_stats.enable

Enables/disables the collection and display of per-client NFS statis-

tics, as described in 

nfsstat

.

nfs.tcp.enable

 When enabled, the NFS server supports NFS over TCP. By 

default, the feature is enabled; it can be disabled if there is a prob-

lem with some client when using NFS over TCP, and that client 

cannot be configured to use NFS over UDP.

nfs.v2.df_2gb_lim

Causes the filer to return replies to the ”file system statistics” NFS 

version 2 request that show no more than (2**31)-1 (or 

2,147,483,647) total, free, or available bytes (i.e., 2GB) on the file 

system.

Some NFS clients require this option because, if they get return val-

ues from the ”file system statistics” request with more than the 

specified number of bytes, they’ll incorrectly compute the amount 

of free space on the file system, and may think that there’s no free 

space on a file system that has more than 2GB free.

options

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments