Dell PowerVault 720N Command Reference Manual Download Page 284

Page: 284 / 606

11-4 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

6DPSOH4XRWDV)LOH

Following is a sample quotas file that includes different kinds of quotas:

#Quota Target

type

disk files

/vol/home/user/jdoe

user

500M 10K

108

user

500M 10K

jsmith

user@/vol/rls

500M 10K

publications

group

750M

/vol/home/eng

group@/vol/cad

750M 75K

/vol/cad/proj1

tree

750M 75K

writers

group@/vol/cad/proj1

150M

user

50M

15K

user@/vol/cad/proj1

50M

10K

group

750M

85K

group@/vol/cad/proj1

100M

75K

mhoward

user

150M 100K

mhoward

user@/vol/cad/proj1

75M

75K

mfisher

user

Any operation that creates files or writes to them must satisfy all applicable quotas.

The following list describes the effects of the sample quotas file:

The owner of

/vol/home/user/jdoe

and the user whose UID is 108 can each use

500 MB of disk space and 10,240 files in the root volume.

The user whose user name is jsmith can use 500 MB of disk space and 10,240

files in the

rls

volume.

The group publications can use 750 MB of disk space with no restrictions on the

number of files in the root volume.

The group that owns

/vol/home/eng

can use 750 MB of disk space and 76,800

files in the

cad

volume.

The qtree proj1 in the

cad

volume can use 750 MB of disk space and 76,800 files.

The writers group can use 150 MB of disk space and an unlimited number of files

in the proj1 qtree provided that the quotas on the proj1 qtree are not exceeded.

Any user not otherwise mentioned in this file can use 50 MB of disk space and

15,360 files in the root volume.

In the proj1 qtree, any user not otherwise mentioned in this file can use 50 MB of

disk space and 10,240 files.

Any group not otherwise mentioned in this file can use 750 MB of disk space and

87,040 files in the root volume.

In the proj1 qtree, any group not otherwise mentioned in this file can use 100 MB

of disk space and 76,800 files.

The user mhoward can use 150 MB of disk space and 102,400 files in the root

volume. In the proj1 qtree, mhoward can use 75 MB of disk space and 76,800

files.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 284 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: