Dell PowerVault 720N Command Reference Manual Download Page 546

Page: 546 / 606

A-132 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

httpd.log - Log of HTTP

SYNOPSIS

/etc/log/httpd.log

DESCRIPTION

The HTTP server logs an entry for every file retrieved via HTTP. This log, written to

/etc/log/httpd.log

, is stored in the Common Log Format, which is used by

many World-Wide Web servers.

Each entry in

/etc/log/httpd.log

consists of one line with seven fields. The

fields are, in order:

address

The IP address of the HTTP client requesting the file.

rfc931

This field is always -.

authuser

This field is always -.

date

The time and date the request was is reported in the format [Day/

Mon/Year:HH:MM:SS], which is logged in universal time (GMT)

rather than the local time zone.

request

A quoted string is recorded for the method (request type) and file

involved in the request.

result

The status code for the request.

bytes

The size of the file in bytes.

Possible values for

result

codes include:

200

Success: the requested file was transmitted.

302

Redirected (see

/etc/httpd.translations

)

304

Not modified (client cache used)

400

Bad request.

403

Access to file prohibited.

404

File not found.

503

HTTP server disabled.

The size of the log file can be restricted by the option

httpd.log.max_file_size

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 546 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: