Dell PowerVault 720N Command Reference Manual Download Page 548

Page: 548 / 606

A-134 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

NAME

httpd.passwd - file of passwords required for HTTP access

SYNOPSIS

/etc/httpd.passwd

DESCRIPTION

The password file containing the encrypted form of the password that an HTTP

client must supply to have access to a file in a controlled-access directory tree, as

declared in

/etc/httpd.access

The password is encrypted in the regular UNIX style. User of NCSA or Apache

can use their

htpasswd

program to generate the user_id:passwd pair.

The HTTP access control does not use the existing CIFS password database on

the filer because in http basic authentication, in each request for protected pages,

the value of

passwd

is sent over the network in clear text, and without encryption

would compromise the users password.

NOTE:

Encrypted password file can only be generated and imported from a UNIX client.

SYNTAX

user

id1:encrypted

passwd1

used

id2:encrypted

passwd2

...

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 548 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: