manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 256 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 256

9-4

Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

6QDSVKRW&RPPDQGVDQG2SWLRQV

6QDSVKRW&RPPDQGV

The commands related to snapshots are listed in Table 9-1. If the volume name is 

omitted in any of these commands, the command applies to the root volume.

6QDSVKRW2SWLRQV

The following options for the 

vol options

 command affect snapshots in the speci-

fied volume. The options remain in effect after the filer reboots. The options are 

shown in Table 9-2.

NOTE: The 

dump

 command does not work if the 

nosnapdir

 or 

nosnap

 option is on.

7DEOH6QDSVKRW&RPPDQGV

&RPPDQG

0HDQLQJ

snap list

a

 

volume_name 

a. Some of the information generated by this command is available through SNMP using the 

Dell custom MIB as described in “Using SNMP” in Chapter 4.

Lists all available snapshots.

snap create 

volume_name 

snapshot_name 

Creates a snapshot with a spec-

ified name.

snap delete 

volume_name 

snapshot_name 

Deletes a specified snapshot.

snap rename 

volume_name from to

Renames a snapshot.

snap reserve

 

volume_name

 

Reserves a percentage of the 

disk space for snapshots.

snap sched

 

volume_name

Schedules automatic 

snapshots.

7DEOH6QDSVKRW2SWLRQV

2SWLRQV

'HVFULSWLRQV

nosnap

Disables automatic snapshots. By default, this option is 

disabled.

nosnapdir

Makes the 

.snapshot

 directory that is present at client 

mount points or the root of the CIFS share invisible. It also 

turns off access to the 

.snapshot

 directory and all 

.snapshot

 

directories under the mount point or the root of the CIFS 

share. By default, this option is disabled.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments