manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 159 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 159

File Sharing Between NFS and CIFS Users 5-3

CIFS client applications often perform operations such as writing to a temporary file, 

renaming the original file to a backup name, then renaming the temporary file to the 

original name. Therefore, take care in using symbolic links whose ultimate target is a 

file, as opposed to a directory. If the original file were targeted directly by a symbolic 

link, this sequence of operations would have the result—unintended by the applica-

tion—of the file being stored in the directory where the symbolic link was, and the 

renamed symbolic link pointing at the original file rather than to the updated file. For 

symbolic links to directories, this type of situation does not arise. 

Because many PC applications work as described previously, if there are symbolic 

links that point to files, a PC could encounter such symbolic links. It is best to disable 

symbolic links for CIFS when there are symbolic links that point to files.

If you expect many files to be changed by applications that update files as described, 

you might want to disable symbolic links for CIFS.

+RZWR(QDEOHDQG'LVDEOH6\PEROLF/LQNV

You enable and disable symbolic links with the 

cifs.symlinks.enable

 option. The 

option is On by default.

To disable symbolic links for CIFS, use

options cifs.symlinks.enable off

To reenable symbolic links for CIFS, use

options cifs.symlinks.enable on

+RZWR5HGLUHFW$EVROXWH6\PEROLF/LQNV

In a UNIX environment, the NFS client interprets the file system location represented 

by an absolute symbolic link. The CIFS client cannot do this. In a CIFS environment, 

the filer enables you to redirect absolute symbolic links on the filer. 

For example, you might want to redirect symbolic links pointing at the 

/u/users/charlie

 

directory to the 

/home/charlie

 directory on the filer. You do so by specifying symbolic 

link redirection mappings in a text file named 

/etc/symlink.translations

. 

The format of the 

/etc/symlink.translations 

file

 

is:

Map link target

where both 

link

 and 

target

 are absolute symbolic link path names.

For example, the entry:

Map /u/users/charlie/* /home/charlie/* 

makes symbolic links pointing at the 

/u/users/charlie

 directory point to the 

/home/

charlie 

directory.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments