manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 441 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 441

Command Reference A-27

NAME

disk_fw_update - update disk firmware

SYNOPSIS

disk_fw_update

 [ 

disk

_

name

 ]

DESCRIPTION

Use the 

disk_fw_update

 command to update out-of-date firmware on all disks 

or a specified disk on a filer. Each filer is shipped with a 

/etc/disk_fw

 directory 

that contains the latest firmware revisions. This command makes disks inaccessi-

ble for up to 2 minutes, so network sessions using the filer should be closed 

down before running it. This is particularly true for CIFS sessions, which will nor-

mally be terminated while this command executes.

Warning messages for disks being updated should be ignored while this com-

mand executes.

In the 

/etc/disk_fw

 directory, the firmware file name is in the form of 

product

_

ID.revision.LOD

. For example, if the firmware file is for Seagate disks 

with product ID ST118202FC and the firmware revision is FD9E, the file name is 

ST118202FC.FD9E.LOD

. The 

revision

 in the file name is the number against 

which the filer compares each disk’s existing firmware revision. In this example, if 

the filer has disks with firmware revision F307, the file 

/etc/disk_fw/

ST118202FC.FD9E.LOD

, assuming it exists, will be downloaded to all the disks 

when you execute this command.

To download the firmware to all disks, enter 

disk_fw_update

 without any argu-

ments. To download the firmware to a particular disk, specify the disk name in 

the command, which is in the form of 

adapter

_

number.disk

_

ID

. For example, if 

the disk ID is 1 and the disk is on adapter 8, enter the following command:

disk_fw_update

 

8.1

To determine disk firmware revisions, enter the 

sysconfig

 

-v

 command. The fol-

lowing example is partial output from the 

sysconfig

 

-v

 command. In this 

example, the firmware revision for the disk is FD9E.

       slot 8: FC adapter: isp2100 (chip rev. 3)

            Firmware rev:  1.14.19

            Host Loop Id:  119

            FC Node Name:  2:000:00e08b:00a002

            Cacheline size:     8    FC Packet size:     34 000 000

            0: SEAGATE ST118202FC       FD90 Size=17GB (17783112 blocks)

disk_fw_update

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments