manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 330 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 330

14-4 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

In this example, a tape library with SCSI ID 6 is attached to slot 6 of the filer.

([DPSOHRIWKHV\VFRQILJY&RPPDQG

The following example shows a tape stacker with SCSI ID 6 and a tape drive with 

SCSI ID 4 attached to slot 6 of the filer:

slot 6: SCSI Host Adapter 6 (QLogic ISP 1040B)

Firmware Version 2.26           Clock Rate 60MHz.

6: BHTi    Quad 7          1.41 

4: QUANTUM DLT7000         1B41 

In-Band Enclosure Services

8VLQJWKHPW&RPPDQGWR&RQWURO7DSH

'HYLFHV

7KHPW&RPPDQG6\QWD[

You can control tape devices with the 

mt

 command. The syntax of the 

mt

 command 

is as follows:

mt [-f|-t] 

tapedevice command [ count ]

This section discusses only the 

eom

, 

fsf

, 

rewind

, 

offline

, and 

status

 com-

mands. Keep in mind the following information:

‡

The 

-f

 and 

-t

 options are interchangeable as far as the filer is concerned. Only 

the 

-f

 option is shown here.

‡

For additional information about controlling tape devices and detailed information 

about the 

mt

 command, consult the 

mt

(1) man page. 

‡

For information about the format of a filer tape device name, consult the 

tape

(4) 

man page.

0RYLQJD7DSHWRWKH(QGRI'DWD

You can append material, such as a dump, on a tape device. To do so, use the 

eom

 

command, which moves the tape to the end of data (end of media if the tape is full), 

as in the following example:

mt -f nrst0a eom 

After this command, you can write to the remainder of the tape. Make sure that there 

is enough tape for your additional data.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments