manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 499 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 499

Command Reference A-85

In addition, when 

routed

 is running, it deletes dynamic routes, created by ICMP 

redirects, every 3 minutes.

USAGE

routed

 

on

The route daemon may be turned on at any time with the 

routed

 

on

 command. This causes 

routed

 to read the 

/etc/

dgateways

 file, and turn on RIP snooping, dynamic route time-

outs, and default gateway selection. If 

routed

 is already 

running, this option causes it to reread the 

/etc/dgateways

 

file, and reinitialize. By default, 

routed

 is invoked at boot time 

in 

/etc/rc

.

routed

 

off

 

The route daemon may be turned off at any time with the 

routed

 

off

 command. This stops all RIP snooping, default gate-

way selection, and dynamic route timeouts. The currently 

selected default gateway is not be deleted when 

routed

 is 

turned off.

routed

 

status

Displays the status of the default gateway list. This shows 

whether RIP snooping is active, the current list of default gate-

ways, their metrics, the state of the gateways (ALIVE or 

DEAD), and the last time each gateway was heard from. The 

output looks like:

OPTIONS

-

n

If this option precedes 

status

, the command displays numeric values for 

gateway names.

maytag> routed status

RIP snooping is on

Gateway Metric State Time Last Heard

alantec1 Wed 

1  ALIVE 

Mar 9 03:38:41 GMT 1994

groucho Wed 

1  ALIVE

Mar 9 03:38:41 GMT 1994

192.9.200.66 

1  ALIVE

Wed Mar 9 03:38:41 GMT 1994

192.9.200.77 

1  ALIVE

Wed Mar 9 03:38:41 GMT 1994

 tphub1 Wed 

2  ALIVE

Mar 9 03:38:41 GMT 1994

192.9.200.32 

2  ALIVE

Wed Mar 9 03:38:41 GMT 1994

192.9.200.252 

3  ALIVE

Wed Mar 9 03:38:41 GMT 1994

192.9.200.251 

4  ALIVE

Wed Mar 9 03:38:41 GMT 1994

192.9.200.250 

5  ALIVE

Wed Mar 9 03:38:41 GMT 1994

119 free gateway entries, 9 used

routed

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments