Dell PowerVault 720N, Command Reference Manual, Page: 140 / 606

4-16 Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide
The media types you can use depend on the type of Ethernet card. The possible
types you can enter in the
ifconfig
command are the same as those you can select
when running
setup
. They are described in Table 4-5.
6HWWLQJWKH0D[LPXP7UDQVPLVVLRQ8QLW078
The following example shows setting the MTU for an Ethernet interface:
LIFRQILJHPWXVL]H
Table 4-6 lists the default MTU sizes.
Use a smaller MTU value for an interface if a bridge or router on the attached network
cannot break large packets into fragments.
To view the current setting of the MTU value, use the following command:
QHWVWDW L
&RQILJXULQJWKH,QWHUIDFH8SRU'RZQ
The following example illustrates how to configure interfaces up and down:
LIFRQILJHDXS
LIFRQILJHGRZQ
LIFRQILJYLUWBLQWHUIDFHXS
7DEOH0HGLD7\SHVRQDQ(WKHUQHW,QWHUIDFH
0HGLDW\SH 'HVFULSWLRQ
100tx 100Base-T
100tx-fd 100Base-T, full-duplex
tp 100Base-T
tp-fd 10Base-T, full-duplex
auto 100Base-T/100Base-TX Ethernet using Auto-Negotiation
1000fx Gigabit Ethernet
7DEOH'HIDXOW0786L]HV
,QWHUIDFH 'HIDXOW078VL]H
Ethernet 1500
Gigabit Ethernet 1500