manualshive.com logo in svg

Dell PowerVault 720N, Command Reference Manual, Page: 177 / 606

Share
Download
Dell PowerVault 720N Command Reference Manual Download Page 177

File Sharing Between NFS and CIFS Users5-21

'HOHWLQJ(QWULHV)URPWKH:$)/&UHGHQWLDO

&DFKH

'HVFULSWLRQ

This procedure deletes entries from the WAFL credential cache. You do this to force 

the lookup of UIDs the next time they are used, but you don’t want to wait until the 

entries time out automatically.

3UHUHTXLVLWHV

You must have the name and optionally the IP address of the person or group you 

want to remove from the WAFL credential cache.

&DXWLRQ

If the Windows NT name is the name of a group, this procedure removes all mem-

bers of that group from the WAFL credential cache.

6WHS

To remove an entry from the WAFL credential cache, enter the following command:

wcc -x 

name

name

 can be one of the following specifications:

‡

-s 

followed by a Windows user name or group name

‡

-u

 followed by a UNIX name

You can further narrow the specification of a user by adding 

-i

, followed by the IP 

address of the host that the user is on.

'LVSOD\LQJ:$)/&UHGHQWLDO&DFKH

6WDWLVWLFV

'HVFULSWLRQ

This procedure displays WAFL credential cache statistics in detail. You can do this at 

any time to monitor the WAFL credential cache.

6WHS

To display statistics about the WAFL credential cache, enter the following command:

wcc -d 

You can get more detailed information by appending 

-v

 to the command line.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Reviews:

No comments