Dell PowerVault 720N Command Reference Manual Download Page 158

Page: 158 / 606

5-2

Dell PowerVault 720N, 740N, and 760N System Administrator and Command Reference Guide

Byte-range locks work on portions of a file. Byte-range operations other than reads by

a UNIX-based NFS client fail if the attempted operation is forbidden by the lock. As is

appropriate for NFS, a UNIX-based NFS application might be forbidden to access a

byte-range that is locked by CIFS.

NOTE: There is one exception to the enforcement of locks set by CIFS clients on the

filer. When the filer runs the

dump

command, it ignores the file lock set by a CIFS cli-

ent that prevents read access to parts of a file or the entire file. Ignoring the read

file lock allows the filer to back up all files.

0DQDJLQJ6\PEROLF/LQNVIRU&,)6$FFHVV

$ERXW6\PEROLF/LQNV

CIFS clients can follow symbolic links, which are created by NFS clients. A symbolic

link is a special file that points to another file or directory. A symbolic link is, in some

respects, like a shortcut in the Windows environment.

There are two kinds of symbolic links: absolute and relative:

Absolute symbolic links begin with a slash (/) and are treated as a path relative to

the root of the file system.

Relative symbolic links begin with a character other than a slash (

) and are

treated as a path relative to the parent directory of the symbolic link.

&RQWUROOLQJ$FFHVVWR6\PEROLF/LQNV

You can control CIFS access to symbolic links in three ways:

Enabling or disabling symbolic links

Redirecting absolute symbolic links

Preventing or allowing the following of symbolic links that can refer to a directory

higher in the same tree

(QDEOLQJ6\PEROLF/LQNV

When the symbolic links for CIFS feature is enabled, which is the default setting, if

the object being accessed by a CIFS client is an absolute or relative symbolic link, the

filer follows the link under the following conditions:

The ultimate target is in the same share as the symbolic link.

A symbolic link encountered in any path component other than the final one is

always followed.

The final component of a symbolic link is followed only if the operation is to open

an existing file.

Other operations, such as deleting and renaming, result in deleting or renaming

the symbolic link itself rather than the target of the symbolic link.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 158 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: