Dell PowerVault 720N Command Reference Manual Download Page 579

Page: 579 / 606

Command ReferenceA-165

NAME

NIS - NIS client service

DESCRIPTION

The NIS client service provides information about hosts, user passwords, user

groups and netgroups on a network. In NIS terminology, each of the above is

referred to as the map and the specific information being looked up is called the

key. For example, the hosts map is like the

/etc/hosts

file; it provides a transla-

tion from host names to IP addresses. The NIS service typically has two parts: a

client component which requests information and a name server which provides

it.

Data ONTAP 5.3 supports only the NIS client. When the filer needs to resolve a

key in a given map, it looks at the

/etc/nsswitch.conf

(see

nsswitch.conf

) file to

figure out the order in which the various databases should be consulted. For

example, in case of the hosts map the lookup order may be

file,

nis,

dns

. This

means that the filer will first consult the

/etc/hosts

file. If the host name is not

found in the local file, it will then try the NIS service. If the host name is still not

found, then it will attempt a DNS lookup.

The NIS client can be enabled on the filer by running the

setup

command (see

setup

) or by manually editing the configuration files as described below. If NIS is

enabled by running the

setup

command, then the NIS domain name needs to be

entered.

Enabling

NIS

without

the

setup

command:

1. Edit the

/etc/rc

file (see

) to make sure that the option specifying the NIS

domain name is set and the option to enable NIS is on. For example:

options nis.domainname dell.com

options nis.enable on

2. Reboot the filer for these changes to take effect. If the above options com-

mands are also entered from the console, the reboot can be avoided. If the

options are entered via the console only, they are not saved across a reboot.

Enabling

NIS

with

the

setup

command:

At setup time, one can choose to enable NIS when prompted to do so.

setup

then queries for the NIS domain name.

Summary of Contents for PowerVault 720N































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PowerVault 720N

Reviews:

Dell PowerVault 720N, Command Reference Manual, Page: 579 / 606

Search results

Summary of Contents for PowerVault 720N

Reviews: